Skip to main content

LTE Network Configuration

In order for the Lobaro devices to be able to dial into the mobile network, it may be necessary to configure the network related parameters correctly.

info

Lobaro devices normally perform a network selection based on the profile stored on the SIM card inserted in the device. This means that in most case the mobile operator and band have not to be configured since the devices perform an autodetect based on internal metrics. In some cases it may be beneficial to set the device to use a specific operator, then the operator, and band configuration parameters of the device comes into play.

In contrast to this the apn parameter should be set correctly in any case. The * (autodetect) feature will only work for few sim cards, like 1NCE and Vodafone Easy Connect SIM cards.

Configuration Parameters

Our cellular IoT (LTE-M or NB-IoT) devices usually allow the configuration of

APN

  • Should be configured to SIM specific value, e.g. iot.1nce.net
  • Default: *
    • APN Autodetect -> Modem uses internally known APN
      • Will only work for 1NCE and Vodafone EasyConnect
    • APN autodetect not possible: Modem falls back to Not set (see below)
  • Not set -> Modem uses SIM internal information

Operator

  • Usually no need to configure it explicitly to some specific MCC+MNC operator code like 26201
  • Default: Not set -> Modem performs automatic network selection

Band

  • Usually no need to configure it explicitly
  • Default: Not set -> Modem will use one of these bands 3,8,20
note

Not set denotes that the configuration parameter field is empty.

warning

If you decide to configure the operator and/or band you may decrease the devices coverage and ability to find alternative networks at a specific location. Use this configuration parameters only if you know what you are doing!

For initial configuration of these parameters please use the Lobaro Maintenance Tool.

List of common APN and Operators

  • MCC = Mobile Country Code
  • MNC = Mobile Network Code
  • Operator = MCC+MNC (Config Parameter for Lobaro Devices)
NetworkCountryOperatorMCCMNCAPN
Deutsche TelekomGermany2620126201internet.m2mportal.de
1NCEGermany*iot.1nce.net
Vodafone DeutschlandGermany2620226202IoT Easy Connect: lpwa.vodafone.com
Telefonica (O2)Germany2620326203IoT Sim Prepaid: iotde.telefonica.com
T-Mobile Austria GmbH (Magenta)Austria2320323203?
TDC A/SDenmark2380123801?
Telenor DenmarkDenmark2380223802?
Telia DKDenmark2382023820?
Tele2Sweden2400724007?
COM4Norway2420224202com4

Other provider codes and deployed bands are listed in a list of mobile operator codes on Wikipedia.

Additional information on operators and bands can be found here: